What are the primary property enhancements from adding Glass Fibers to PET?

The addition of glass fibers dramatically increases the tensile strength, flexural modulus (rigidity), and creep resistance of PET. It also significantly raises the Heat Deflection Temperature (HDT), allowing parts to withstand higher continuous use temperatures. Furthermore, it greatly improves dimensional stability, reducing shrinkage and warpage.

How does PET GF compare to PBT GF, a similar material?

PET GF and PBT GF are closely related and offer similar high strength and stiffness. PET GF typically has a slightly higher Heat Deflection Temperature and better tensile strength at elevated temperatures, while PBT GF may offer marginally better surface finish and faster crystallization during molding. The choice often depends on specific processing and end-use temperature requirements.

Why is PET GF favored for applications requiring dimensional stability?

PET GF exhibits very low moisture absorption and minimal post-molding shrinkage. This, combined with the restraining effect of the glass fibers, ensures that parts maintain their precise shape and dimensions even when exposed to varying environmental humidity and temperature, which is critical for gears, housings, and structural frames.

What are important processing considerations for PET GF?

Like most engineering polyesters, PET GF must be thoroughly dried before processing to prevent hydrolysis (moisture-induced degradation) which severely weakens the material. It also requires adequate mold temperatures to ensure proper crystallization for optimal mechanical properties and surface appearance.

Is PET GF suitable for electrical and electronic applications?

Absolutely. PET GF offers excellent electrical insulation properties, high tracking resistance, and good performance in humid conditions. Coupled with its strength and heat resistance, it is an excellent choice for connectors, circuit breakers, motor housings, and other electrical components.

Nylon Plastic - Nylon Plastic

عرض 76–79 من أصل 79 نتيجة

حيوان أليف
PET GF20 with 20% Glass Fiber Reinforcement – Nylon Plastic
قراءة المزيد
حيوان أليف
PET GF30 with 30% Glass Fiber Reinforcement – Nylon Plastic
قراءة المزيد
حيوان أليف
PET GF40 with 40% Glass Fiber Reinforcement – Nylon Plastic
قراءة المزيد
حيوان أليف
PET GF50 with 50% Glass Fiber Reinforcement – Nylon Plastic
قراءة المزيد

PET GF20 with 20% Glass Fiber Reinforcement – Nylon Plastic

PET GF30 with 30% Glass Fiber Reinforcement – Nylon Plastic

PET GF40 with 40% Glass Fiber Reinforcement – Nylon Plastic

PET GF50 with 50% Glass Fiber Reinforcement – Nylon Plastic

من الفكرة إلى الواقع، لنبدأ من الفكرة إلى الواقع

نقوم بهندسة المواد والقوالب لتتناسب مع المواد المستخدمة.

الشركة

الدعم

اتصل بنا

نايلون بلاستيك

PET GF20 with 20% Glass Fiber Reinforcement – Nylon Plastic

PET GF30 with 30% Glass Fiber Reinforcement – Nylon Plastic

PET GF40 with 40% Glass Fiber Reinforcement – Nylon Plastic

PET GF50 with 50% Glass Fiber Reinforcement – Nylon Plastic

من الفكرة إلى الواقع، لنبدأ من الفكرة إلى الواقع

نقوم بهندسة المواد والقوالب لتتناسب مع المواد المستخدمة.

الشركة

الدعم

اتصل بنا

تواصل معنا