{"id":11151,"date":"2026-06-02T01:47:37","date_gmt":"2026-06-02T01:47:37","guid":{"rendered":"https:\/\/nylonplastic.com\/spi-surface-finish-standards-plastic-injection-molding\/"},"modified":"2026-06-02T05:27:52","modified_gmt":"2026-06-02T05:27:52","slug":"spi-surface-finish-standards-plastic-injection-molding","status":"publish","type":"post","link":"https:\/\/nylonplastic.com\/de\/spi-surface-finish-standards-plastic-injection-molding\/","title":{"rendered":"SPI Surface Finish Standards for Plastic Injection Molding: Complete Guide"},"content":{"rendered":"

SPI (Society of the Plastics Industry) surface finish standards define 12 grades of mold polish \u2014 from mirror-gloss A-1 to rough blasted D-3. Specifying the right SPI finish on your injection mold drawing directly controls part appearance, mold release, and even part strength for engineering plastics like nylon.<\/p>\n

SPI Finish Grades at a Glance<\/h2>\n
\"Professional
Professional industrial photograph: SPI Surface Finish Standards for Plastic Inj<\/figcaption><\/figure>\n
\"Visual
Visual reference chart six SPI finish grades in grid: A-2 mirror gloss, A-3 glos<\/figcaption><\/figure>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
SPI Grade<\/th>\nMethode<\/th>\nRa (\u03bcin)<\/th>\nTypical Use<\/th>\n<\/tr>\n<\/thead>\n
A-1<\/td>\nGrade #3 Diamond Buff<\/td>\n0-1<\/td>\nOptical lenses, mirrors<\/td>\n<\/tr>\n
A-2<\/td>\nGrade #6 Diamond Buff<\/td>\n1-2<\/td>\nHigh-gloss consumer products<\/td>\n<\/tr>\n
A-3<\/td>\nGrade #15 Diamond Buff<\/td>\n2-3<\/td>\nGlossy housings, automotive interior<\/td>\n<\/tr>\n
B-1<\/td>\n600 Grit Paper<\/td>\n2-4<\/td>\nSemi-gloss parts, good release<\/td>\n<\/tr>\n
B-2<\/td>\n400 Grit Paper<\/td>\n4-6<\/td>\nMatte finish, most engineering parts<\/td>\n<\/tr>\n
B-3<\/td>\n320 Grit Paper<\/td>\n7-10<\/td>\nFunctional matte, good hiding of flow lines<\/td>\n<\/tr>\n
C-1<\/td>\n600 Stone<\/td>\n10-12<\/td>\nIndustrial, non-cosmetic<\/td>\n<\/tr>\n
C-2<\/td>\n400 Stone<\/td>\n12-16<\/td>\nGeneral purpose, EDM surfaces<\/td>\n<\/tr>\n
D-1 \/ D-2 \/ D-3<\/td>\nBlast (various media)<\/td>\n12-30+<\/td>\nTexture, grip surfaces, hiding defects<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Nylon-Specific Finish Considerations<\/h2>\n
\"Side-by-side
Side-by-side comparison two identical nylon injection molded parts: one SPI B-2 <\/figcaption><\/figure>\n

Nylon (PA6\/PA66) has excellent mold surface replication \u2014 it copies the cavity finish almost exactly. SPI B-2 or B-1 is our recommended default for engineering nylon parts: matte enough to hide minor flow lines and knit lines, but smooth enough for clean release. Mirror-gloss A-grade finishes on nylon require impeccably dry material and a hot mold (80-100\u00b0C) to achieve full replication. Cold mold + glossy cavity = dull, hazy part surface.<\/p>\n

Cost Impact of Higher Polish<\/h2>\n

Every SPI grade jump roughly doubles the polishing labor. A-1 diamond polish on a complex cavity can add $500-1,500 per cavity vs a standard B-2 finish. For multi-cavity production molds, the cost multiplies. Unless your part is a visible consumer product, SPI B-2 or B-3 produces perfectly functional parts at the lowest mold cost.<\/p>\n

H\u00e4ufig gestellte Fragen<\/h2>\n
\nWhich SPI finish gives the best mold release for nylon?<\/strong><\/summary>\n

SPI B-1 or B-2 with 1-2\u00b0 draft works best. Mirror finishes (A-grade) can actually increase sticking because the ultra-smooth surface creates more contact area. A slight texture (B-3 or C-1) disrupts the vacuum-like stick between smooth plastic and smooth steel.<\/p>\n<\/details>\n

\nWill the mold finish affect my part’s mechanical strength?<\/strong><\/summary>\n

Not directly, but rough blasted surfaces (D-grade) create micro stress concentrators that can reduce fatigue life in cyclic-loading applications. For structural nylon parts under repeated load, specify B-1 or B-2 on critical surfaces.<\/p>\n<\/details>\n

\nHow do I specify SPI finish on a mold drawing?<\/strong><\/summary>\n

Call out “SPI B-2 all over unless noted” on the cavity drawing and use separate callouts for specific surfaces that need different finishes. Always specify finish on the cavity side \u2014 the core can be coarser since internal surfaces aren’t cosmetic.<\/p>\n<\/details>\n

\nCan textured finishes help hide sink marks?<\/strong><\/summary>\n

Yes. SPI D-2 or D-3 blast textures effectively camouflage minor sink marks over ribs and bosses. For parts with unavoidable wall thickness variations, a textured finish is the most practical aesthetic solution without redesigning the part.<\/p>\n<\/details>\n

\n

Need injection molded parts with specific surface finishes?<\/strong>
We provide mold polishing to any SPI grade and can recommend the right finish for your material and application.<\/p>\n<\/figure>\n\t\t\t

\n\t\t\t