What is ABS?
ABS(아크릴로니트릴 부타디엔 스티렌) is a terpolymer combining three monomers for a balanced property profile:
- Acrylonitrile: Chemical resistance and thermal stability
- Butadiene: Toughness and impact resistance
- Styrene: Rigidity and ease of processing
주요 속성
| 속성 | 가치 |
|---|---|
| 인장 강도 | 40-50 MPa |
| 굴곡 탄성 계수 | 2.0-2.5 GPa |
| Heat Deflection Temp | 85-95°C at 1.8 MPa |
| Glass Transition | 105°C |
| 밀도 | 1.04 g/cm³ |
ABS Print Settings
Recommended Parameters
- Nozzle Temperature: 230-260°C
- Bed Temperature: 90-110°C
- Print Speed: 40-80 mm/s
- Cooling Fan: 0-30%
- Layer Height: 0.1-0.3mm
Troubleshooting Guide
Warping
Cause: Uneven cooling
Solutions:
- Use enclosed chamber
- Increase bed temperature
- Apply ABS slurry or glue
Layer Separation
Cause: Insufficient adhesion
Solutions:
- Increase nozzle temperature
- Reduce cooling fan
- Slow print speed
Post-Processing ABS
Acetone Smoothing
Acetone vapor smooths ABS surfaces, eliminating layer lines:
- Place part in sealed container
- Add acetone on paper towel
- Allow 10-60 minutes
- Remove and let dry
Frequently Asked Questions
Is ABS harder to print than PLA?
Yes. ABS requires higher temperatures, enclosed chamber, and careful attention to bed adhesion.
Can I smooth ABS with acetone?
Yes. Acetone vapor smoothing is a popular technique for ABS.
Where can I buy quality ABS filament?
Nylonplastic supplies ABS in 1.75mm and 2.85mm. Free samples available.
ABS Filament Guide — Frequently Asked Questions
Is ABS harder to print than PLA?
Yes. ABS requires higher temperatures, enclosed chamber, and careful attention to bed adhesion and cooling.
Can I smooth ABS with acetone?
Yes. Acetone vapor smoothing is a popular technique for ABS, eliminating layer lines.
Where can I buy quality ABS filament?
Nylonplastic supplies ABS in 1.75mm and 2.85mm. Free samples available.
