Glass Fiber Reinforced Nylon — When Standard Isn’t Enough

Why Glass Fiber Reinforcement?

Adding glass fiber to nylon dramatically improves mechanical properties, making it suitable for demanding applications that unreinforced nylon cannot handle.

Property Improvements

Недвижимость	PA6	PA6 + 30% GF
Прочность на разрыв	75 MPa	150 MPa
Модуль упругости	2.8 GPa	7.5 GPa
HDT (1.8 MPa)	70°C	205°C
Поглощение влаги	8%	1.5%

Приложения

Automotive: radiator end tanks, intake manifolds
Electrical: high-temperature connectors
Industrial: pump housings, valve bodies

Processing Guidelines

Dry at 80-100°C for 4-6 hours
Use wear-resistant screw
Higher mold temperatures (60-90°C)

ЧАСТО ЗАДАВАЕМЫЕ ВОПРОСЫ

How do you know whether Glass Fiber Reinforced Nylon — When Standard Isn’t Enough fits a part?

Glass Fiber Reinforced Nylon — When Standard Isn’t Enough fits a part when its load capacity, temperature range, moisture exposure, wear behavior, and processing method match the real service conditions.

What properties should be checked for Glass Fiber Reinforced Nylon — When Standard Isn’t Enough?

Check strength, stiffness, impact resistance, heat resistance, moisture absorption, dimensional stability, friction, wear, and chemical compatibility.

What is the biggest selection risk for Glass Fiber Reinforced Nylon — When Standard Isn’t Enough?

The biggest risk is choosing from a datasheet value without considering actual environment, processing method, part geometry, and long-term use.

When should Glass Fiber Reinforced Nylon — When Standard Isn’t Enough be tested before production?

Testing is recommended when the part faces load, heat, chemicals, moisture, tight tolerances, regulatory requirements, or a new operating environment.