Carbon fiber reinforced nylon (CF-Nylon) is a high-performance composite material where short carbon fibers (typically 10-30% by weight) are compounded into a nylon matrix. This reinforcement dramatically improves mechanical properties, making CF-Nylon one of the strongest engineering materials available for both 3D printing and CNC machining applications.
CF-Nylon Material Properties
With tensile strength up to 120 MPa for CF30 grades (vs 80 MPa for unfilled nylon 66) and flexural modulus of 15,000-18,000 MPa (approaching aluminum stiffness), CF-Nylon offers exceptional performance. The coefficient of thermal expansion is 70% lower than unfilled nylon, ensuring dimensional stability. Our Sợi PA6-CF provides excellent strength-to-weight ratio.
3D Printing vs CNC Machining
For 3D printing, CF-Nylon offers rapid prototyping and complex geometries but requires hardened steel or ruby nozzle (brass wears rapidly). CNC machining provides consistent properties and tighter tolerances (±0.02mm). For CNC applications, our PA66-CF30 stock material is recommended.
Ứng dụng
CF-Nylon is used in aerospace for UAV frames, satellite components, and interior brackets. Automotive applications include engine mounts, structural components, and lightweight replacements. Industrial uses include pump impellers, bearing surfaces, and wear components.
Source CF-Nylon Materials
As a specialized source manufacturer, we supply CF-Nylon in multiple grades with custom compounding capabilities. Liên hệ với chúng tôi for samples and technical support.
Carbon Fiber Nylon — Frequently Asked Questions
Why does carbon fiber wear out brass nozzles quickly?
Carbon fiber has hardness of approximately 200 HB (Brinell), while standard brass has hardness of only 55-100 HB. A brass nozzle will wear out within 10-50 hours of printing with CF filament. Highly filled CF30 can destroy brass within 10 hours. Always use hardened steel or ruby nozzles.
Is CF-Nylon stronger than aluminum?
CF-Nylon PA66+CF30 has tensile strength up to 120 MPa with specific strength comparable to 6061-T6 aluminum at approximately 60% of the weight. Carbon fiber reinforcement reduces thermal expansion by 70% vs unfilled nylon.
Where can I source CF-Nylon materials?
Nylonplastic is a specialized manufacturer with ISO9001/14001/45001/IATF16949 certifications. We supply PA6+CF, PA66+CF30, and PA12+CF in filament, sheet, rod, and tube forms. Our 6000m2 facility has 300+ CNC machines. Contact us for free samples.
Get a Free Quote
Fill out the form below and our engineers will respond within 24 hours.
Câu hỏi thường gặp
When is Carbon Fiber Reinforced Nylon — High-Strength FDM and CNC Material the right choice?
Carbon Fiber Reinforced Nylon — High-Strength FDM and CNC Material is the right choice when the part requires machined accuracy, controlled surfaces, repeatable features, and a material that can be cut reliably.
What should be confirmed before ordering Carbon Fiber Reinforced Nylon — High-Strength FDM and CNC Material?
Xác nhận phiên bản bản vẽ, loại vật liệu, dung sai, số lượng, kích thước quan trọng, độ nhám bề mặt và các yêu cầu kiểm tra trước khi bắt đầu sản xuất.
What usually drives cost in Carbon Fiber Reinforced Nylon — High-Strength FDM and CNC Material?
Chi phí thường phụ thuộc vào nguyên vật liệu, thời gian chuẩn bị, thời gian vận hành máy, độ phức tạp của dung sai, thiết bị kẹp giữ, khả năng tiếp cận dụng cụ, công đoạn hoàn thiện, kiểm tra và số lượng đơn hàng.
How can quality risk be reduced in Carbon Fiber Reinforced Nylon — High-Strength FDM and CNC Material?
Rủi ro về chất lượng được giảm thiểu bằng cách đánh dấu rõ ràng các đặc điểm quan trọng, tránh các dung sai quá chặt chẽ không cần thiết, xác nhận khả năng sản xuất từ sớm và sử dụng dữ liệu kiểm tra cho các kích thước quan trọng.
English
Dutch
German
French
Korean
Russian
Japanese
Spanish
Vietnamese
Chinese
Portuguese
Arabic