Engineering a Sustainable Future: The Nylon Plastic Blog

Explore industry insights, material innovations, and tailored solutions for the Automotive, Electronics, Appliance, and Industrial sectors.

nylon conformal cooling injection molds 3d printed channels guide 4

Engineering Plastics Injection Molding Parts

Injection Mold Cooling System Design: Layout, Balance and Validation

August 3, 2026

Injection Mold Cooling System Design: Layout, Balance and Validation Read Post »

nylon 4226 4

Engineering Plastics Injection Molding Parts

Melt Temperature vs Mold Temperature in Injection Molding

August 3, 2026

Melt Temperature vs Mold Temperature in Injection Molding Read Post »

Injection molding back pressure process control with screw barrel model pressure gauge color mixing bubbles and splay defect samples

Engineering Plastics Injection Molding Parts

Injection Pressure, Speed and Packing: How to Set a Stable Process

August 3, 2026

Injection Pressure, Speed and Packing: How to Set a Stable Process Read Post »

nylon 4226 0

Engineering Plastics Injection Molding Parts

Injection Molding Process Parameters: Process Window and Setup Sheet

August 3, 2026

Injection Molding Process Parameters: Process Window and Setup Sheet Read Post »

Flow marks and jetting in injection molding shown at gate entry and along the flow front

Engineering Plastics Injection Molding Parts

Flow Marks vs Jetting in Injection Molding: Diagnosis and Fixes

August 3, 2026

Flow Marks vs Jetting in Injection Molding: Diagnosis and Fixes Read Post »

Flash in injection molding showing parting-line flash and inspection gauge

Engineering Plastics Injection Molding Parts

Flash in Injection Molding: Parting Line, Clamp and Packing Fixes

August 2, 2026

Flash in Injection Molding: Parting Line, Clamp and Packing Fixes Read Post »

Delamination in injection molding showing a lifted surface layer and polymer interface

Engineering Plastics Injection Molding Parts

Delamination in Injection Molding: Causes and Corrective Actions

August 2, 2026

Delamination in Injection Molding: Causes and Corrective Actions Read Post »

Color streaks in injection molding showing mixed polymer color and molded housing

Engineering Plastics Injection Molding Parts

Color Streaks in Injection Molding: Mixing and Contamination Fixes

August 2, 2026

Color Streaks in Injection Molding: Mixing and Contamination Fixes Read Post »

Burn marks in injection molding showing a molded housing and vented mold cavity

Engineering Plastics Injection Molding Parts

Burn Marks in Injection Molding: Trapped Gas, Heat and Venting

August 2, 2026

Burn Marks in Injection Molding: Trapped Gas, Heat and Venting Read Post »