PA66 GF30 | 30% Glass Fiber Reinforced Nylon 66 – Nylon Plastic

What is PA66 GF30?

PA66 GF30 is the workhorse grade of glass-reinforced nylon 66, containing 30% glass fibers. It delivers an outstanding balance of high mechanical strength, exceptional thermal properties, and good chemical resistance, making it one of the most widely used engineering plastics for demanding structural applications.

Why Choose Our PA66 GF30?

✅ Industry-Standard Performance: The go-to material for high-stress, high-temperature components across automotive, electrical, and industrial sectors.

✅ Proven Reliability: Consistent quality and a vast database of application experience ensure design success.

✅ Comprehensive Technical Support: Full assistance from material selection to overcoming processing challenges like moisture control.

✅ Fast Delivery: Reliable supply chain from prototyping to mass production

Categories: , Brand:

PA66 GF30 Material Grade and Technical Documentation

PA66 GF30 identifies polyamide 66 reinforced with 30% glass fiber. Select the exact compound, color and processing route before purchasing; the material name alone does not define heat aging, impact behavior, flame rating or a finished-part specification.

The named grade reference below is WanHan PA66 WHG30A. Use the current PA66 WHG30A technical data sheet for initial screening, then confirm the production formulation and approval requirements. Request a PA66 GF30 TDS and Material Recommendation. An initial material inquiry does not require CAD or a confirmed quantity.

Data scope: the PDF gives typical values, not design allowables or guaranteed specification limits. It does not state the conditioning state or specimen details. HDT is reported under ISO 75-2/B; do not treat it as an ISO 75 result at 1.8 MPa or as a continuous-use temperature.

 

PA66 GF30 Named-Grade Technical Data

WanHan PA66 WHG30A: selected typical TDS values
Property Test method Unit Typical value
Tensile strength ISO 527-2 MPa 175
Flexural strength ISO 178 MPa 255
Flexural modulus ISO 178 MPa 7,000
HDT, method B ISO 75-2/B °C 220
Density ISO 1183 g/cm³ 1.38
Molding shrinkage ISO 2577 % 0.5
Flammability rating UL 94 — Not specified in this TDS

万翰详情 01

PA66 Series Material Performance Comparison Table:

Grade family Initial selection consideration Required validation
PA66 GF15 / GF20 Compare when moderate reinforcement and retained toughness matter. Exact-grade stiffness, impact, heat and conditioning data.
PA66 GF30 Compare for a balance of reinforcement and processing requirements. Selected formulation, gate/fiber orientation, moisture and molded-part performance.
PA66 GF33 Review an intermediate glass loading against the actual grade data. Do not assume a thermal or mechanical improvement from the percentage alone.
PA66 GF50 / GF60 Compare where additional reinforcement is relevant to the design. Flow, warpage, weld-line strength, impact and surface requirements.

 

Key Advantages of PA66 GF30:

✅ High Strength & Stiffness:

Offers an excellent strength-to-weight ratio, often used as a direct replacement for metals in structural parts.

✅Exceptional Heat Resistance:

Check the exact-grade HDT method, heat-aging data and service conditions; HDT does not establish continuous-use performance.

✅ Good Dimensional Stability:

Review moisture conditioning, creep, fiber orientation and molded-part dimensions for the actual service environment.

✅ Excellent Wear & Abrasion Resistance:

Superior performance in moving parts and gears compared to many other plastics.

 

Industry Applications:

the crucial role of injection molding in automotive industry

PA66GF30 is commonly used in automotive components, interior parts, and other applications that require a good surface finish and fundamental rigidity.

Powering Innovation Across Industries

Industry Key Applications
Automotive Engine covers, intake manifolds, structural brackets, sensor housings, connectors.
Explore Automotive Applications →
Electrical & Electronics Circuit breakers, switches, connector housings, insulating components.
Discover E&E Solutions →
Industrial Equipment Gears, bearings, machine housings, rollers, mechanical components.
See Industrial Uses →
Various application scenarios of PA plastics
Various application scenarios of PA plastics

How to Choose the Right PA66 Grade?

For optimal toughness and cost-effectiveness, start with PA66 GF15. It provides a solid upgrade from unreinforced PA66, offering solid strength and good impact resistance for general industrial and automotive components.

For the best all-around, industry-proven performance, choose PA66 GF30. It delivers an excellent balance of high strength, stiffness, and exceptional heat resistance (HDT >250°C), making it the default choice for demanding structural and under-hood applications.

For a measurable performance upgrade where standard grades reach their limit, consider PA66 GF33. This grade offers higher stiffness and thermal margin than GF30, subject to exact-grade data and molded-part validation.

For maximum stiffness, strength, and thermal resistance where metal replacement is the goal, look to PA66 GF50 or PA66 GF60. These high-fiber grades deliver near-metallic properties for extreme loads and temperatures, but require careful evaluation of their reduced impact toughness and significant processing challenges.

Why Choose Us?

万翰详情 03

万翰详情 04

Processing, Modifications and Material Inquiry

Follow the approved grade drying and processing instructions. Review moisture, fiber orientation, shrinkage, weld lines and conditioning before judging critical dimensions. Ask about reinforcement, color matching, heat stabilization, impact modification, flame-retardant or hydrolysis-resistant options only where the application requires them; availability and final properties are confirmed for the selected formulation.

For a grade review, send the application, temperature and load, chemical or moisture exposure, color, required documents and material usage if known. For finished parts, use a separate Manufacturing Quote with dimensions and process requirements. See the PA66 GF30 technical guide for selection context.

PA66 GF30 Questions

Can I request a PA66 GF30 TDS and sample?

Request the current datasheet and discuss sample material for the selected grade. Include the application, color, trial quantity and validation requirements. Sample availability, charges and delivery are confirmed for the request.

How is the delivery schedule confirmed?

The quotation confirms the selected grade, quantity, color or formulation changes, required documents, packaging and destination. Ask for the agreed dispatch and delivery milestones before ordering.

Which material and compliance documents should I request?

Ask for the exact-grade TDS and SDS, and specify whether batch COA or COC and application compliance records are required. UL 94, RoHS and REACH suitability must be confirmed for the selected formulation and document scope; PA66 GF30 alone is not a compliance approval.

Tell Us About Your Part

This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
Scroll to Top

Get in Touch

Fill out the form below, and we will be in touch shortly.

Contact Information