Engineering a Sustainable Future: The Nylon Plastic Blog

Explore industry insights, material innovations, and tailored solutions for the Automotive, Electronics, Appliance, and Industrial sectors.

POM acetal injection molded gears bushings sliding blocks resin pellets mold insert shrinkage chart and calipers

Engineering Plastics Injection Molding Parts

POM Injection Molding: Acetal Material, Shrinkage and Design Guide

July 11, 2026

POM Injection Molding: Acetal Material, Shrinkage and Design Guide Read Post »

Low pressure molding process for electronics cable assemblies circuit boards connectors and polyamide resin pellets

Engineering Plastics Injection Molding Parts

Low Pressure Molding: Process, Materials and When to Use It

July 11, 2026

Low Pressure Molding: Process, Materials and When to Use It Read Post »

UV stabilized nylon outdoor parts with carbon black HALS and UVA additive samples beside UV weathering test equipment

Engineering Plastics Injection Molding Parts

UV Stabilizer for Nylon: Carbon Black, HALS and UVA for Outdoor Parts

July 11, 2026

UV Stabilizer for Nylon: Carbon Black, HALS and UVA for Outdoor Parts Read Post »

PA6 and PA66 injection molded gears brackets tensile bars resin pellets and calipers for nylon material selection

Engineering Plastics Injection Molding Parts

Nylon 6 vs Nylon 66: Material Selection for Injection Molded Parts

July 11, 2026

Nylon 6 vs Nylon 66: Material Selection for Injection Molded Parts Read Post »

PA6 and PA66 nylon chemical compatibility chart with molded parts, oils, fuels, acids, alkalis, solvents and calipers

Engineering Plastics Injection Molding Parts

Nylon Chemical Compatibility Chart: PA6, PA66, Oils, Fuels, Acids and Solvents

July 11, 2026

Nylon Chemical Compatibility Chart: PA6, PA66, Oils, Fuels, Acids and Solvents Read Post »

Injection molding material selection samples including ABS PC nylon PP POM TPE PMMA molded parts and resin pellets

Engineering Plastics Injection Molding Parts

Plastic Injection Molding Materials: Common Plastics and Selection Guide

July 11, 2026

Plastic Injection Molding Materials: Common Plastics and Selection Guide Read Post »

Short shot injection molded plastic parts with incomplete fill edges, mold insert, resin pellets and calipers

Engineering Plastics Injection Molding Parts

Short Shot Injection Molding: Causes, Troubleshooting and Part Design Fixes

July 11, 2026

Short Shot Injection Molding: Causes, Troubleshooting and Part Design Fixes Read Post »

Molded plastic housing with visible sink marks above bosses and ribs beside DFM samples and calipers

Engineering Plastics Injection Molding Parts

Sink Marks in Injection Molding: DFM, Packing and Wall Thickness Guide

July 11, 2026

Sink Marks in Injection Molding: DFM, Packing and Wall Thickness Guide Read Post »

Injection molded plastic plaques with silver splay marks beside resin pellets, dryer hopper and inspection light

Engineering Plastics Injection Molding Parts

Splay in Injection Molding: Causes, Moisture, Temperature and Material Fixes

July 11, 2026

Splay in Injection Molding: Causes, Moisture, Temperature and Material Fixes Read Post »