PA6 GF10 Glass Fiber Reinforced Nylon 6 Pellets

PA6 GF10 is nylon 6 reinforced with 10% glass fiber and supplied as injection-molding pellets. This page uses PA6 WHG10A as the reference grade. Review small housings, appliance supports and molded gears against their loads, moisture exposure and required fit.

Reference grade: PA6 WHG10A

Supply: 10% glass fiber reinforced pellets. Confirm color, quantity and required documents with your inquiry.

Categories: ,

PA6 GF10 Material Overview

PA6 GF10 is nylon 6 reinforced with 10% glass fiber and supplied as injection-molding pellets. This page uses PA6 WHG10A as the reference grade. Review small housings, appliance supports and molded gears against their loads, moisture exposure and required fit.

Item Details
Reference grade PA6 WHG10A
Polymer PA6 (nylon 6)
Reinforcement 10% glass fiber
Form Pellets for material-supply inquiries
Color and processing Confirm the offered grade and current processing guidance

Reference Material Properties

Typical values for PA6 WHG10A from the linked supplier PDF.

Property Typical value Test method
Tensile strength 103 MPa ISO 527-2
Tensile strain at break 16% ISO 527-2
Flexural modulus 3350 MPa ISO 178
Deflection temperature under load 155 °C ISO 75-2/B
Density 1.15 g/cm³ ISO 1183

Specimen conditioning is not stated in the reference sheet. These values are not guaranteed specification limits. Only rows with a usable property, unit and method are reproduced; request clarification of the remaining sheet entries before relying on them for design.

Download PA6 WHG10A supplier reference datasheet (PDF)

Application Review

PA6 GF10 illustrative component applications
Illustrative component concepts. Confirm the selected formulation for the actual part.

Small equipment housings

Check lid location, screw bosses and the dimensional fit after moisture conditioning. Qualify any electrical requirements separately.

Appliance supports

Review the loads at mounting points, nearby heat sources and cleaning exposure. Test representative supports in their installed condition.

Gears and moving components

Specify the mating component, speed, lubrication and duty cycle. Validate wear and running clearance with actual molded parts.

Processing and Part Checks

Follow the WHG10A drying and molding instructions. Control moisture before processing, and define the conditioning used for dimensional acceptance. Check gates, weld lines and fiber orientation before fixing tool dimensions.

For component production, review our injection molding service. For other resin options, browse engineering plastic materials.

Material Supply and Manufacturing Support

Nylon Plastic connects engineering plastic supply with custom manufacturing. WANHAN is our cooperating compounding factory; the photographs below show its material-feeding equipment, extrusion process and laboratory.

Material feeding equipment at WANHAN, Nylon Plastic’s cooperating factory
Material feeding
Extruded plastic strands at the WANHAN cooperating factory
Extrusion process
Laboratory work area at the WANHAN cooperating factory
Laboratory

Grade and formulation selection

Share your current grade, application and operating conditions. We coordinate the material review and identify the matching datasheet for the formulation offered.

Quality documents for your order

Specify the TDS, batch records, inspection requirements or compliance files your purchasing team needs. The documents and acceptance criteria are agreed for the quoted material.

Support beyond resin pellets

For a finished component, connect material selection with part design, tooling and molding review. Start with the drawing, expected quantity and critical dimensions.

Cooperating Factory Management-System Certificates

The supplied ISO 9001, ISO 14001 and ISO 45001 certificates identify Guangdong Wanhan as the certified entity. Their scope concerns modified plastic granules and the related management activities; it does not certify every material grade or every finished-part manufacturing service.

Review manufacturing capabilities and quality documentation. For document approval, match the legal entity, certificate scope and quoted grade.

Frequently Asked Questions

What material does this page cover?

PA6 GF10 is nylon 6 reinforced with 10% glass fiber and supplied as injection-molding pellets. This page uses PA6 WHG10A as the reference grade. Review small housings, appliance supports and molded gears against their loads, moisture exposure and required fit.

Can PA6 GF10 dimensions be checked only immediately after molding?

Agree the inspection timing and moisture condition first. Nylon absorbs moisture, which can change dimensions and mechanical behavior. The reference PDF does not state the conditioning behind its typical values.

Are these values a production specification?

No. They are typical reference values for PA6 WHG10A. Agree the current grade, test conditions, acceptance limits and required documents for the order.

Do the images show the exact supplied color and finished parts?

The images illustrate resin appearance and possible component concepts. Confirm color and finish on the offered material and samples; the pictured parts do not establish suitability for your design.

What is required for a material replacement?

Identify the current resin and reason for changing it. Compare exact-grade data, dimensions, loads, temperature and environmental exposure, then validate the intended part before production.

What should I send for a quote or sample request?

Send the reference grade, application, color, estimated material quantity and required documents. For a molded-part inquiry, add the drawing, critical dimensions and acceptance requirements. A CAD file is optional for a material-only inquiry.

Related Material Grades

PA6 GF15   |   PA6 GF25

Request Material Data and a Quote

Share the grade, application, service conditions, color, quantity and required documents so the offered material can be reviewed against your project.

Request PA6 WHG10A TDS and Quote

Scroll to Top

Get in Touch

Fill out the form below, and we will be in touch shortly.

Contact Information