POM (Polyoxymethylene), also known as acetal or Delrin, and nylon are the two most widely used engineering plastics for precision mechanical components. Both offer excellent mechanical properties, good wear resistance, and proven reliability in demanding applications.
Key Property Differences
POM has a coefficient of friction of 0.15-0.35 vs nylon’s 0.3-0.5, with moisture absorption of only 0.2-0.3% vs nylon PA66’s 8-9%. POM’s tensile strength is 60-70 MPa while nylon PA66 offers 80-85 MPa. Maximum continuous temperature is 100°C for POM vs 200°C for nylon. For high-load applications, consider our PA66-CF30.
When to Choose POM/Acetal
POM is preferred for precision gears and bearings (lower friction), applications requiring dimensional stability, food contact applications (FDA-compliant grades), and high-speed rotating parts.
When to Choose Nylon
Nylon is better for high-load applications, elevated temperatures, noise reduction requirements, and impact resistance applications.
Source Engineering Materials
As a specialized source manufacturer, we supply both POM and nylon materials in rod, sheet, and tube forms. Contact us for material selection assistance and pricing.
FAQ
When is Ultem PEI 9085 — Aerospace-Grade 3D Printing and CNC Material a good option?
Ultem PEI 9085 — Aerospace-Grade 3D Printing and CNC Material is a good option when fast iteration, complex geometry, low tooling cost, or low-volume production is more important than molded-part unit cost.
What should be checked before choosing Ultem PEI 9085 — Aerospace-Grade 3D Printing and CNC Material?
Check part size, material properties, surface finish, dimensional tolerance, heat exposure, load direction, and whether post-processing is required.
How does Ultem PEI 9085 — Aerospace-Grade 3D Printing and CNC Material compare with CNC machining?
3D printing can create complex shapes quickly, while CNC machining is often stronger for precise surfaces, tighter tolerances, and production-grade materials.
What affects the cost of Ultem PEI 9085 — Aerospace-Grade 3D Printing and CNC Material?
Cost depends on material, build volume, print time, layer height, support removal, finishing, inspection, and the number of parts in the build.
POM vs Nylon — Frequently Asked Questions
Which material is better for precision gears: POM or Nylon?
POM (Acetal/Delrin) is preferred for precision gears due to its lower coefficient of friction (0.15-0.35 vs 0.3-0.5 for nylon), excellent dimensional stability with low moisture absorption (0.2-0.3%), and good wear resistance. POM gears operate quietly and maintain precise dimensions.
When should I choose nylon over POM?
Choose nylon (PA66) when your application requires higher load capacity (80-85 MPa vs 60-70 MPa for POM), elevated temperature resistance (200C continuous vs 100C for POM), superior impact resistance, or noise reduction.
Where can I source POM and nylon materials?
Nylonplastic is a specialized manufacturer established in 2005 with ISO9001/14001/45001/IATF16949 certifications. We supply POM homopolymer, POM copolymer, PA6, PA66, and PA12 in rod, sheet, and tube forms. Our 300+ CNC machines can machine these to 0.02mm tolerance. Contact us for free samples.
English
Dutch
German
French
Korean
Russian
Japanese
Spanish
Vietnamese
Chinese
Portuguese
Arabic